metalled film capacitors

Product Scope:
Power Range : up to 5000 μF Voltage Range : 450V to 1800V
Application:
These capacitors are designed for use on DC supplies and are intended to protect the network from momentary voltage spikes and surges and for filtering out AC ripple.
Quality Assurance System:ISO 9001:2008 ,CE

Dielectric material: Polypropylene film
Aluminum case, Side board 2mm, Cover and Base 3mm. Live or Dead case on request.
Terminals material: Copper Insulation Oil: PEPE or C101 for high frequency capacitors ;
Rapeseed oil for DC capacitors (Non-PCB.Environmentally friendly,non-toxic biodegradable)Mounting position: Vertically or Horizontal with proper support for the weight of the capacitor.

MKPA-MC AC filter capacitor Introduction: 
1. Aluminum housing package high temperature and high conductive filler injection molding:
2. Copper nut copper screw extraction, installation is simple and convenient,flame retardant positioning cover insulation;
3. High capacitance,small size,high pressure level,self healing;
4. High frequency harmonic current,high DV/DT bearing capacity.

MKPD-AP DC-Link capacitor Introduction:
1. Special structure material design, self healing. low loss angle, low equi valent series resistance, low temperature rise.
2. Stack type bus leads to low inductance,are widely used in the IGBT style,direct mounting;
3.  High temperature and high injection plastic perfusion, can long life work in high temperature and high humidity complex application environment.

MKPS-TE IGBT subber capacitor Introduction:
1. Mylar tape Sealed with epoxy resin;
2. Tin plated copper wire lead, convenient installation;
3. Non inductive structure,ESL low, ESR small, high pulse current, high DV/DT bearing capacity, high pressure, low loss, low temperature rise, long life and so on.

MKPS-TC IGBT subber capacitor Introduction:
1. Mylar tape,Sealed with epoxy resin;
2. Tinned copper wire, copper nut, easy installation;
3. Non inductive structure, ESL low, ESR small, high pulse current, high DV/DT bearing capacity, high pressure, low loss, low temperature rise, long life and so on.

MKPS-P IGBT subber capacitor Introduction:
1. Plastic, Sealed with epoxy resin;
2. Tin-plated copper inserts leads, easy installation for IGBT;
3.  Resistance to high voltage,low,low temperature rise;
4. low ESL and ESR;
5. High pulse Current.

MKPR-PC/PS Resonant capacitor Introduction:
1. Plastic packaging.Sealed with epoxy resin;
2. Copper nut lead, convenient installation; Non inductive structure, ESL low,ESR small,high pulse current, high DV/DT bearing capacity,
3. high pressure,low loss, low temperature rise,long life and so on.

MKPR-MT Resonant capacitor Introduction:
1. Mylar tape. Sealed with epoxy resin;
2. Copper nut lead,convenient installation;
3. Non inductive structure, ESL low, ESR small, high pulse current, high DV/DT bearing capacity, high pressure, low loss, low temperature rise ,long life and so on.